Skip to content

GTA 6 · Guide

GTA 6 on PS5: set up chiaki-ng and test 2x on PC

Pair your PS5 with chiaki-ng on Windows, check the stream on your home network, then try Lossless Scaling and compare camera movement.

By: 3 min read
Police boats and flashing lights under a bridge in GTA 6.
Contents 5
  1. Register the PS5 with chiaki-ng
  2. Compare the picture with frame generation on and off
  3. More GTA 6 guides
  4. Sources
  5. Frequently asked questions

I use two separate steps for the PS5. First I get a clean picture and working controls in chiaki-ng. Only then do I try frame generation on the Windows PC. The PS5 continues to run the game.

At a glance
  • Pair your PS5 with chiaki-ng on Windows, check the stream on your home network, then try Lossless Scaling and compare camera movement.
  • 2x adds intermediate images on the PC. The game and controller updates still follow the console's own timing.
  • Switch off PC frame generation and repeat the same turn. If the delay persists, compare the network connection and the picture directly on the console.

Register the PS5 with chiaki-ng

  1. Enable Remote Play in the PS5 system settings. To wake the console from rest mode, also allow the network connection to stay active and the console to be turned on over the network.
  2. Install the Windows build of chiaki-ng from the project's official releases. With both devices on the same network, open the app and select your PS5. Follow the registration flow for the PlayStation account used on the console.
  3. Use automatic registration if the app offers it. For manual pairing, display the device-pairing code in the PS5 Remote Play settings and enter it in chiaki-ng. If discovery fails, the client also accepts the console's local IP address.

Connect your controller to the PC, start the registered session and launch GTA 6. If motion repeatedly breaks up, lower the stream bitrate or resolution for a second run. A 60 fps stream setting is a transport choice and does not tell you how many distinct frames the game drew.

Compare the picture with frame generation on and off

Keep the stream windowed or borderless. In Lossless Scaling on Windows, choose fixed frame generation at 2x. Leave resolution scaling off for this comparison. Activate it on the stream window, then repeat the same slow camera turn.

Compare moving edges, overhead wires and the minimap. A higher counter can include repeated or generated frames. If outlines split, the picture hitches or steering feels late, switch generation off and compare the same turn again.

More GTA 6 guides

Sources

Frequently asked questions

Does chiaki-ng always require a pairing code?

Automatic registration may be offered for your signed-in account. Manual registration uses the code displayed by the PS5.

2x adds intermediate images on the PC. The game and controller updates still follow the console's own timing.

Switch off PC frame generation and repeat the same turn. If the delay persists, compare the network connection and the picture directly on the console.

All GTA 6 guides →

Unofficial site, not affiliated with Rockstar Games or Take-Two Interactive.

Read next

🛒 Sklep Kinetyka CapCut Pro 460 zł/rok Lovable Pro 450 zł/rok Replit Core 119 zł/rok Zobacz wszystko →
× ‹ powiększenie ›